Speed Up WAN Link..Ideas needed

[Juli Mallett]

Hi Ali,

On Tue, Dec 13, 2011 at 13:08, Ali Jawad <alijawad1 at gmail.com> wrote:
> and on the client I am getting
>
> 1323524646.018556 [/wanproxy/proxy/proxy0/connector] ERR: void
> ProxyConnector::splice_complete(Event): Unexpected event: <Error>/32
> [Broken pipe]
> 1323524690.407944 [/assert] EMERG: void
> PipeProducer::produce(Buffer*): Halting: Assertion (!output_eos_)
> failed at ../../io/pipe/pipe_producer.cc:109 in function void
> PipeProducer::produce(Buffer*).
> Aborted

Thanks.  Several other users have reported this, but I have not been
able to reproduce it.  I will redouble my efforts to reproduce.

> On Tue, Dec 13, 2011 at 3:06 AM, Ali Jawad <alijawad1 at gmail.com> wrote:
>> Hi
>> Browsers are FF 4.x and 3.x on Windows and Linux, I also tried IE8,
>> the config is the same one given in the examples, the OS is CentOS 5.6
>> 64bit.
>> Regards
>>
>> On Mon, Dec 12, 2011 at 12:48 AM, Juli Mallett <juli at clockworksquid.com> wrote:
>>> Thanks for the feedback.  I don't think I will need access, but I may
>>> need more configuration information to reproduce.  What OS is WANProxy
>>> running on?  Can you send your configuration?  What browser is the
>>> client?
>>>
>>> Thanks!
>>>
>>> On Sun, Dec 11, 2011 at 13:44, Ali Jawad <alijawad1 at gmail.com> wrote:
>>>> Hi
>>>> Thanks for the help so far, I might be able to give you access to
>>>> check it out if needed, as for now no IPV6, sites like cnn youtube etc
>>>> Regards
>>>>
>>>> On Mon, Dec 12, 2011 at 12:34 AM, Juli Mallett <juli at clockworksquid.com> wrote:
>>>>> This seems very strange.  Which sites?  Do you have IPv6 connectivity?
>>>>>  If you don't have IPv6 connectivity, I wonder if that might be the
>>>>> problem, and we might need some way to tell WANProxy to use IPv4 only.
>>>>>  If you have specific examples that likely will make it easier for me
>>>>> to reproduce and fix.
>>>>>
>>>>> Thanks & sorry to hear about your difficulty,
>>>>> Juli.
>>>>>
>>>>> On Sun, Dec 11, 2011 at 12:04, Ali Jawad <alijawad1 at gmail.com> wrote:
>>>>>> Hi
>>>>>> I completed the setup, but some sites open and some not, some sites
>>>>>> need to be reloaded a few times for it to work, I.e. CSS does not load
>>>>>> etc.
>>>>>> Any ideas ?
>>>>>> Regards
>>>>>>
>>>>>> On Mon, Dec 5, 2011 at 12:27 AM, Juli Mallett <juli at clockworksquid.com> wrote:
>>>>>>> Hi Ali,
>>>>>>>
>>>>>>> If you already have the SOCKS example configured, then you should be
>>>>>>> able to use your browser or operating system's proxy configuration to
>>>>>>> tell it to use SOCKS for HTTP or FTP or whatever protocols you need.
>>>>>>> If you have trouble finding this and tell us what OS and browser or
>>>>>>> other software you're using I'm sure one of us can help you get the
>>>>>>> information you need!
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Juli.
>>>>>>>
>>>>>>> On Sun, Dec 4, 2011 at 03:26, Ali Jawad <alijawad1 at gmail.com> wrote:
>>>>>>>> Hi
>>>>>>>> I did setup wanproxy in client/server mode as per the Proxying over a
>>>>>>>> WAN using SOCKS example in http://wanproxy.org/examples.shtml . Here
>>>>>>>> is the issue
>>>>>>>>
>>>>>>>> I do have a server in Asia which is the client and a server in the USA
>>>>>>>> which is the wanproxy server, I want traffic for browsing to pass
>>>>>>>> through the wanproxy link and from there on fetch the sites I need in
>>>>>>>> the states and send them back after that through the WAN link to the
>>>>>>>> client server which sends them to the browser of the client in my LAN.
>>>>>>>>
>>>>>>>> Is this something WAN proxy does ? Do I need to do additional stuff ?
>>>>>>>> Such as setting up SQUID on wanproxy server or client server ? Is any
>>>>>>>> ip forwarding needed ? What configuration should I use on the browsers
>>>>>>>> ?
>>>>>>>>
>>>>>>>> I am sorry for the long list of questions, but I am sure it will come
>>>>>>>> in handy for people who research the topic online "once answered that
>>>>>>>> is :)"
>>>>>>>>
>>>>>>>> Thanks !
>>>>>>>> _______________________________________________
>>>>>>>> wanproxy mailing list
>>>>>>>> wanproxy at lists.wanproxy.org
>>>>>>>> http://lists.wanproxy.org/listinfo.cgi/wanproxy-wanproxy.org