Speed Up WAN Link..Ideas needed

[Ali Jawad]

Hi
I tried to install latest src code but did only run in to problems
during compiling, but 0.7.2 did not face any issues, did you face
problems with websites opening during that error ?
Regards

On Wed, Dec 14, 2011 at 3:39 PM, Diego Woitasen <diego at woitasen.com.ar> wrote:
> On Tue, Dec 13, 2011 at 6:17 PM, Juli Mallett <juli at clockworksquid.com> wrote:
>> Hi Ali,
>>
>> On Tue, Dec 13, 2011 at 13:08, Ali Jawad <alijawad1 at gmail.com> wrote:
>>> and on the client I am getting
>>>
>>> 1323524646.018556 [/wanproxy/proxy/proxy0/connector] ERR: void
>>> ProxyConnector::splice_complete(Event): Unexpected event: <Error>/32
>>> [Broken pipe]
>>> 1323524690.407944 [/assert] EMERG: void
>>> PipeProducer::produce(Buffer*): Halting: Assertion (!output_eos_)
>>> failed at ../../io/pipe/pipe_producer.cc:109 in function void
>>> PipeProducer::produce(Buffer*).
>>> Aborted
>>
>> Thanks.  Several other users have reported this, but I have not been
>> able to reproduce it.  I will redouble my efforts to reproduce.
>>
>>> On Tue, Dec 13, 2011 at 3:06 AM, Ali Jawad <alijawad1 at gmail.com> wrote:
>>>> Hi
>>>> Browsers are FF 4.x and 3.x on Windows and Linux, I also tried IE8,
>>>> the config is the same one given in the examples, the OS is CentOS 5.6
>>>> 64bit.
>>>> Regards
>>>>
>>>> On Mon, Dec 12, 2011 at 12:48 AM, Juli Mallett <juli at clockworksquid.com> wrote:
>>>>> Thanks for the feedback.  I don't think I will need access, but I may
>>>>> need more configuration information to reproduce.  What OS is WANProxy
>>>>> running on?  Can you send your configuration?  What browser is the
>>>>> client?
>>>>>
>>>>> Thanks!
>>>>>
>>>>> On Sun, Dec 11, 2011 at 13:44, Ali Jawad <alijawad1 at gmail.com> wrote:
>>>>>> Hi
>>>>>> Thanks for the help so far, I might be able to give you access to
>>>>>> check it out if needed, as for now no IPV6, sites like cnn youtube etc
>>>>>> Regards
>>>>>>
>>>>>> On Mon, Dec 12, 2011 at 12:34 AM, Juli Mallett <juli at clockworksquid.com> wrote:
>>>>>>> This seems very strange.  Which sites?  Do you have IPv6 connectivity?
>>>>>>>  If you don't have IPv6 connectivity, I wonder if that might be the
>>>>>>> problem, and we might need some way to tell WANProxy to use IPv4 only.
>>>>>>>  If you have specific examples that likely will make it easier for me
>>>>>>> to reproduce and fix.
>>>>>>>
>>>>>>> Thanks & sorry to hear about your difficulty,
>>>>>>> Juli.
>>>>>>>
>>>>>>> On Sun, Dec 11, 2011 at 12:04, Ali Jawad <alijawad1 at gmail.com> wrote:
>>>>>>>> Hi
>>>>>>>> I completed the setup, but some sites open and some not, some sites
>>>>>>>> need to be reloaded a few times for it to work, I.e. CSS does not load
>>>>>>>> etc.
>>>>>>>> Any ideas ?
>>>>>>>> Regards
>>>>>>>>
>>>>>>>> On Mon, Dec 5, 2011 at 12:27 AM, Juli Mallett <juli at clockworksquid.com> wrote:
>>>>>>>>> Hi Ali,
>>>>>>>>>
>>>>>>>>> If you already have the SOCKS example configured, then you should be
>>>>>>>>> able to use your browser or operating system's proxy configuration to
>>>>>>>>> tell it to use SOCKS for HTTP or FTP or whatever protocols you need.
>>>>>>>>> If you have trouble finding this and tell us what OS and browser or
>>>>>>>>> other software you're using I'm sure one of us can help you get the
>>>>>>>>> information you need!
>>>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>> Juli.
>>>>>>>>>
>>>>>>>>> On Sun, Dec 4, 2011 at 03:26, Ali Jawad <alijawad1 at gmail.com> wrote:
>>>>>>>>>> Hi
>>>>>>>>>> I did setup wanproxy in client/server mode as per the Proxying over a
>>>>>>>>>> WAN using SOCKS example in http://wanproxy.org/examples.shtml . Here
>>>>>>>>>> is the issue
>>>>>>>>>>
>>>>>>>>>> I do have a server in Asia which is the client and a server in the USA
>>>>>>>>>> which is the wanproxy server, I want traffic for browsing to pass
>>>>>>>>>> through the wanproxy link and from there on fetch the sites I need in
>>>>>>>>>> the states and send them back after that through the WAN link to the
>>>>>>>>>> client server which sends them to the browser of the client in my LAN.
>>>>>>>>>>
>>>>>>>>>> Is this something WAN proxy does ? Do I need to do additional stuff ?
>>>>>>>>>> Such as setting up SQUID on wanproxy server or client server ? Is any
>>>>>>>>>> ip forwarding needed ? What configuration should I use on the browsers
>>>>>>>>>> ?
>>>>>>>>>>
>>>>>>>>>> I am sorry for the long list of questions, but I am sure it will come
>>>>>>>>>> in handy for people who research the topic online "once answered that
>>>>>>>>>> is :)"
>>>>>>>>>>
>>>>>>>>>> Thanks !
>>>>>>>>>> _______________________________________________
>>>>>>>>>> wanproxy mailing list
>>>>>>>>>> wanproxy at lists.wanproxy.org
>>>>>>>>>> http://lists.wanproxy.org/listinfo.cgi/wanproxy-wanproxy.org
>> _______________________________________________
>> wanproxy mailing list
>> wanproxy at lists.wanproxy.org
>> http://lists.wanproxy.org/listinfo.cgi/wanproxy-wanproxy.org
>
> Hi,
>  I had that error with the 0.7.2 release. I'm using the latest code
> from subversion and I haven't seen the error again.
>
> Regards,
>  Diego
>
> --
> Diego Woitasen