Speed Up WAN Link..Ideas needed

Juli Mallett juli at clockworksquid.com
Sat Dec 17 13:12:15 PST 2011


Hi Ali,

Thanks for pointing out the problems with -Wnon-virtual-dtor — I fixed
those just now.

You need to have the client and server running the same version.  The
protocol has changed considerable from 0.7.2 to today, and you should
not mix the two.

That said, I think you may have some other problem with the errors
you're seeing; I don't think the mix of versions would explain it.
Still, if you would update both to trunk and report any issues you
encounter back, I'll try to fix them as soon as possible.  If you
continue to experience issues, I'll set up a CentOS VM to test
everything myself before asking you to do so again.

Sorry about the continued difficulty.  I usually try very hard to make
sure users have a seamless experience of building and using WANProxy.
Once this is all resolved, I'll put out a release tarball, too.

Thanks,
Juli.

On Sat, Dec 17, 2011 at 05:44, Ali Jawad <alijawad1 at gmail.com> wrote:
> Right now using latest trunk for server, and latest tgz for client  I am
> getting this error
>
> [root at CentOS54 programs]# /usr/sbin/wanproxy -c  /etc/wanproxy.conf
> 1324129297.168662 [/wanproxy] INFO: WANProxy 0.7.2
> 1324129297.169621 [/wanproxy] INFO: Copyright (c) 2008-2011 WANProxy.org.
> 1324129297.170510 [/wanproxy] INFO: All rights reserved.
> 1324129297.171419 [/wanproxy/config] INFO: Configuring WANProxy.
> 1324129297.173140 [/io/system] INFO: Starting IO system.
> 1324129297.173861 [/event/thread] INFO: Starting event thread.
> 1324129319.092574 [/wanproxy/proxy/proxy0/connector] INFO: Connect failed:
> <Error>/0 [Success]
> 1324129319.895308 [/wanproxy/proxy/proxy0/connector] INFO: Connect failed:
> <Error>/0 [Success]
> 1324129320.699028 [/wanproxy/proxy/proxy0/connector] INFO: Connect failed:
> <Error>/0 [Success]
> 1324129321.499178 [/wanproxy/proxy/proxy0/connector] INFO: Connect failed:
> <Error>/0 [Success]
>
>
> On Sat, Dec 17, 2011 at 4:33 PM, Ali Jawad <alijawad1 at gmail.com> wrote:
>>
>> If I go to the programs/wanproxy and just make there I get
>>
>> cc1plus: warnings being treated as errors
>> ../../io/socket/simple_server.h: In instantiation of
>> ‘SimpleServer<TCPServer>’:
>> proxy_listener.h:10:   instantiated from here
>> ../../io/socket/simple_server.h:12: warning: ‘class
>> SimpleServer<TCPServer>’ has virtual functions but non-virtual destructor
>> proxy_listener.h:10: warning: ‘class ProxyListener’ has virtual functions
>> but non-virtual destructor
>> make: *** [proxy_listener.o] Error 1
>>
>>
>> On Fri, Dec 16, 2011 at 3:21 PM, Juli Mallett <juli at clockworksquid.com>
>> wrote:
>>>
>>> Hi Ali,
>>>
>>> The problems you encountered should be fixed in Subversion.  Can you
>>> please provide the errors you encountered?  Most commonly, the problem
>>> is missing libuuid-dev or similar package, at least on Linux systems.
>>>
>>> Thanks!
>>> Juli.
>>>
>>> On Wed, Dec 14, 2011 at 06:56, Ali Jawad <alijawad1 at gmail.com> wrote:
>>> > Hi
>>> > I tried to install latest src code but did only run in to problems
>>> > during compiling, but 0.7.2 did not face any issues, did you face
>>> > problems with websites opening during that error ?
>>> > Regards
>>> >
>>> > On Wed, Dec 14, 2011 at 3:39 PM, Diego Woitasen <diego at woitasen.com.ar>
>>> > wrote:
>>> >> On Tue, Dec 13, 2011 at 6:17 PM, Juli Mallett
>>> >> <juli at clockworksquid.com> wrote:
>>> >>> Hi Ali,
>>> >>>
>>> >>> On Tue, Dec 13, 2011 at 13:08, Ali Jawad <alijawad1 at gmail.com> wrote:
>>> >>>> and on the client I am getting
>>> >>>>
>>> >>>> 1323524646.018556 [/wanproxy/proxy/proxy0/connector] ERR: void
>>> >>>> ProxyConnector::splice_complete(Event): Unexpected event: <Error>/32
>>> >>>> [Broken pipe]
>>> >>>> 1323524690.407944 [/assert] EMERG: void
>>> >>>> PipeProducer::produce(Buffer*): Halting: Assertion (!output_eos_)
>>> >>>> failed at ../../io/pipe/pipe_producer.cc:109 in function void
>>> >>>> PipeProducer::produce(Buffer*).
>>> >>>> Aborted
>>> >>>
>>> >>> Thanks.  Several other users have reported this, but I have not been
>>> >>> able to reproduce it.  I will redouble my efforts to reproduce.
>>> >>>
>>> >>>> On Tue, Dec 13, 2011 at 3:06 AM, Ali Jawad <alijawad1 at gmail.com>
>>> >>>> wrote:
>>> >>>>> Hi
>>> >>>>> Browsers are FF 4.x and 3.x on Windows and Linux, I also tried IE8,
>>> >>>>> the config is the same one given in the examples, the OS is CentOS
>>> >>>>> 5.6
>>> >>>>> 64bit.
>>> >>>>> Regards
>>> >>>>>
>>> >>>>> On Mon, Dec 12, 2011 at 12:48 AM, Juli Mallett
>>> >>>>> <juli at clockworksquid.com> wrote:
>>> >>>>>> Thanks for the feedback.  I don't think I will need access, but I
>>> >>>>>> may
>>> >>>>>> need more configuration information to reproduce.  What OS is
>>> >>>>>> WANProxy
>>> >>>>>> running on?  Can you send your configuration?  What browser is the
>>> >>>>>> client?
>>> >>>>>>
>>> >>>>>> Thanks!
>>> >>>>>>
>>> >>>>>> On Sun, Dec 11, 2011 at 13:44, Ali Jawad <alijawad1 at gmail.com>
>>> >>>>>> wrote:
>>> >>>>>>> Hi
>>> >>>>>>> Thanks for the help so far, I might be able to give you access to
>>> >>>>>>> check it out if needed, as for now no IPV6, sites like cnn
>>> >>>>>>> youtube etc
>>> >>>>>>> Regards
>>> >>>>>>>
>>> >>>>>>> On Mon, Dec 12, 2011 at 12:34 AM, Juli Mallett
>>> >>>>>>> <juli at clockworksquid.com> wrote:
>>> >>>>>>>> This seems very strange.  Which sites?  Do you have IPv6
>>> >>>>>>>> connectivity?
>>> >>>>>>>>  If you don't have IPv6 connectivity, I wonder if that might be
>>> >>>>>>>> the
>>> >>>>>>>> problem, and we might need some way to tell WANProxy to use IPv4
>>> >>>>>>>> only.
>>> >>>>>>>>  If you have specific examples that likely will make it easier
>>> >>>>>>>> for me
>>> >>>>>>>> to reproduce and fix.
>>> >>>>>>>>
>>> >>>>>>>> Thanks & sorry to hear about your difficulty,
>>> >>>>>>>> Juli.
>>> >>>>>>>>
>>> >>>>>>>> On Sun, Dec 11, 2011 at 12:04, Ali Jawad <alijawad1 at gmail.com>
>>> >>>>>>>> wrote:
>>> >>>>>>>>> Hi
>>> >>>>>>>>> I completed the setup, but some sites open and some not, some
>>> >>>>>>>>> sites
>>> >>>>>>>>> need to be reloaded a few times for it to work, I.e. CSS does
>>> >>>>>>>>> not load
>>> >>>>>>>>> etc.
>>> >>>>>>>>> Any ideas ?
>>> >>>>>>>>> Regards
>>> >>>>>>>>>
>>> >>>>>>>>> On Mon, Dec 5, 2011 at 12:27 AM, Juli Mallett
>>> >>>>>>>>> <juli at clockworksquid.com> wrote:
>>> >>>>>>>>>> Hi Ali,
>>> >>>>>>>>>>
>>> >>>>>>>>>> If you already have the SOCKS example configured, then you
>>> >>>>>>>>>> should be
>>> >>>>>>>>>> able to use your browser or operating system's proxy
>>> >>>>>>>>>> configuration to
>>> >>>>>>>>>> tell it to use SOCKS for HTTP or FTP or whatever protocols you
>>> >>>>>>>>>> need.
>>> >>>>>>>>>> If you have trouble finding this and tell us what OS and
>>> >>>>>>>>>> browser or
>>> >>>>>>>>>> other software you're using I'm sure one of us can help you
>>> >>>>>>>>>> get the
>>> >>>>>>>>>> information you need!
>>> >>>>>>>>>>
>>> >>>>>>>>>> Thanks,
>>> >>>>>>>>>> Juli.
>>> >>>>>>>>>>
>>> >>>>>>>>>> On Sun, Dec 4, 2011 at 03:26, Ali Jawad <alijawad1 at gmail.com>
>>> >>>>>>>>>> wrote:
>>> >>>>>>>>>>> Hi
>>> >>>>>>>>>>> I did setup wanproxy in client/server mode as per the
>>> >>>>>>>>>>> Proxying over a
>>> >>>>>>>>>>> WAN using SOCKS example in http://wanproxy.org/examples.shtml
>>> >>>>>>>>>>> . Here
>>> >>>>>>>>>>> is the issue
>>> >>>>>>>>>>>
>>> >>>>>>>>>>> I do have a server in Asia which is the client and a server
>>> >>>>>>>>>>> in the USA
>>> >>>>>>>>>>> which is the wanproxy server, I want traffic for browsing to
>>> >>>>>>>>>>> pass
>>> >>>>>>>>>>> through the wanproxy link and from there on fetch the sites I
>>> >>>>>>>>>>> need in
>>> >>>>>>>>>>> the states and send them back after that through the WAN link
>>> >>>>>>>>>>> to the
>>> >>>>>>>>>>> client server which sends them to the browser of the client
>>> >>>>>>>>>>> in my LAN.
>>> >>>>>>>>>>>
>>> >>>>>>>>>>> Is this something WAN proxy does ? Do I need to do additional
>>> >>>>>>>>>>> stuff ?
>>> >>>>>>>>>>> Such as setting up SQUID on wanproxy server or client server
>>> >>>>>>>>>>> ? Is any
>>> >>>>>>>>>>> ip forwarding needed ? What configuration should I use on the
>>> >>>>>>>>>>> browsers
>>> >>>>>>>>>>> ?
>>> >>>>>>>>>>>
>>> >>>>>>>>>>> I am sorry for the long list of questions, but I am sure it
>>> >>>>>>>>>>> will come
>>> >>>>>>>>>>> in handy for people who research the topic online "once
>>> >>>>>>>>>>> answered that
>>> >>>>>>>>>>> is :)"
>>> >>>>>>>>>>>
>>> >>>>>>>>>>> Thanks !
>>> >>>>>>>>>>> _______________________________________________
>>> >>>>>>>>>>> wanproxy mailing list
>>> >>>>>>>>>>> wanproxy at lists.wanproxy.org
>>> >>>>>>>>>>> http://lists.wanproxy.org/listinfo.cgi/wanproxy-wanproxy.org
>>> >>> _______________________________________________
>>> >>> wanproxy mailing list
>>> >>> wanproxy at lists.wanproxy.org
>>> >>> http://lists.wanproxy.org/listinfo.cgi/wanproxy-wanproxy.org
>>> >>
>>> >> Hi,
>>> >>  I had that error with the 0.7.2 release. I'm using the latest code
>>> >> from subversion and I haven't seen the error again.
>>> >>
>>> >> Regards,
>>> >>  Diego
>>> >>
>>> >> --
>>> >> Diego Woitasen
>>
>>
>



More information about the wanproxy mailing list