Speed Up WAN Link..Ideas needed

Juli Mallett juli at clockworksquid.com
Sun Dec 18 14:24:11 PST 2011


I thought I had fixed this problem.  You are using both zlib and
xcodec, right?  I do not understand how this error could still be
happening.  If you could try with only xcodec or only zlib, that might
be helpful to me, so I know which component is in need of further
testing.

Also, if you want to update the whole tree and rebuild both binaries,
I've added some messages which should make it easier to tell which
PipeProducer subclass is doing the wrong thing here.

Apologies for all the difficulty.  I want you to know that I have been
testing this, and did originally see the problem you report here, but
did find a way to fix it.  I have some work I need to do today that I
do not want to disrupt, but I am hoping that later in my evening (I'm
on the west coast of the US) I will be able to set up a few more
systems to use in testing, and see if I can trigger this bug.

On Sun, Dec 18, 2011 at 05:21, Ali Jawad <alijawad1 at gmail.com> wrote:
> Hi
> Client crashed when a page displayed flash, with following error
>
> 1324214230.331051 [/assert] EMERG: void PipeProducer::produce(Buffer*):
> Halting: Assertion (!output_eos_) failed at
> ../../io/pipe/pipe_producer.cc:109 in function void
> PipeProducer::produce(Buffer*).
> Aborted
>
> Regards
>
> On Sun, Dec 18, 2011 at 3:55 PM, Ali Jawad <alijawad1 at gmail.com> wrote:
>>
>> Hi July
>> I was able to make the connection work, it was a stupid mistake on my
>> side, the errors are less and performance is slightly better but still slow
>> I am getting these errors on client side now
>>
>> 1324212755.168570 [/wanproxy/proxy/proxy0/connector] ERR: void
>> ProxyConnector::splice_complete(Event): Unexpected event: <Error>/104
>> [Connection reset by peer]
>> 1324212756.652634 [/wanproxy/proxy/proxy0/connector] ERR: void
>> ProxyConnector::splice_complete(Event): Unexpected event: <Error>/104
>> [Connection reset by peer]
>> 1324212776.041883 [/wanproxy/proxy/proxy0/connector] ERR: void
>> ProxyConnector::splice_complete(Event): Unexpected event: <Error>/104
>> [Connection reset by peer]
>> 1324212777.468335 [/wanproxy/proxy/proxy0/connector] ERR: void
>> ProxyConnector::splice_complete(Event): Unexpected event: <Error>/104
>> [Connection reset by peer]
>>
>> On server side I am getting
>>
>> 1324184191.330804 [/wanproxy/proxy/proxy-socks0/connector] ERR: void
>> ProxyConnector::splice_complete(Event): Unexpected event: <Error>/104
>> [Connection reset by peer]
>> 1324184194.297132 [/wanproxy/proxy/proxy-socks0/connector] ERR: void
>> ProxyConnector::splice_complete(Event): Unexpected event: <Error>/104
>> [Connection reset by peer]
>> 1324184202.948238 [/wanproxy/proxy/proxy-socks0/connector] ERR: void
>> ProxyConnector::splice_complete(Event): Unexpected event: <Error>/104
>> [Connection reset by peer]
>> 1324184202.951848 [/wanproxy/proxy/proxy-socks0/connector] ERR: void
>> ProxyConnector::splice_complete(Event): Unexpected event: <Error>/104
>> [Connection reset by peer]
>> 1324184217.752559 [/wanproxy/proxy/proxy-socks0/connector] ERR: void
>> ProxyConnector::splice_complete(Event): Unexpected event: <Error>/104
>> [Connection reset by peer]
>> 1324184217.755806 [/wanproxy/proxy/proxy-socks0/connector] ERR: void
>> ProxyConnector::splice_complete(Event): Unexpected event: <Error>/104
>> [Connection reset by peer]
>>
>>
>>
>> Regards
>>
>> On Sun, Dec 18, 2011 at 3:06 AM, Juli Mallett <juli at clockworksquid.com>
>> wrote:
>>>
>>> Very strange.  Can you send the client and server configurations?  I'm
>>> guessing that connect is failing because the ports are mismatched or
>>> similar, but I can't be sure.  It would also be helpful if you could
>>> telnet from the client to the port the server is supposed to be
>>> listening on, to verify that there are no firewalling issues involved.
>>>
>>> On Sat, Dec 17, 2011 at 15:21, Ali Jawad <alijawad1 at gmail.com> wrote:
>>> > Hi Juli
>>> > Did checkout to version 895 on both machines and did the following on
>>> > both
>>> > machines as well , make clean in programs/wanproxy, make, copy wanproxy
>>> > file
>>> > to /usr/sbin/ then launch
>>> >
>>> > /usr/sbin/wanproxy -c /etc/wanproxy.conf
>>> >
>>> > On the client I get
>>> >
>>> > 1324163928.337113 [/wanproxy/proxy/proxy0/listener] INFO: Listening on:
>>> > [0.0.0.0]:3300
>>> > 1324163928.337732 [/event/thread] INFO: Starting event thread.
>>> > 1324163930.640914 [/wanproxy/proxy/proxy0/connector] INFO: Connect
>>> > failed:
>>> > <Error>/0 [Success]
>>> > 1324163931.393061 [/wanproxy/proxy/proxy0/connector] INFO: Connect
>>> > failed:
>>> > <Error>/0 [Success]
>>> > 1324163932.144333 [/wanproxy/proxy/proxy0/connector] INFO: Connect
>>> > failed:
>>> > <Error>/0 [Success]
>>> > 1324163932.919439 [/wanproxy/proxy/proxy0/connector] INFO: Connect
>>> > failed:
>>> > <Error>/0 [Success]
>>> > 1324163933.906755 [/wanproxy/proxy/proxy0/connector] INFO: Connect
>>> > failed:
>>> > <Error>/0 [Success]
>>> > 1324163934.677630 [/wanproxy/proxy/proxy0/connector] INFO: Connect
>>> > failed:
>>> > <Error>/0 [Success]
>>> > 1324163935.459671 [/wanproxy/proxy/proxy0/connector] INFO: Connect
>>> > failed:
>>> > <Error>/0 [Success]
>>> >
>>> >
>>> > And the browser is not working when setting socks to use wanproxy
>>> > client.
>>> > Anything I missed here ?
>>> >
>>> > Thanks
>>> >
>>> > On Sun, Dec 18, 2011 at 2:02 AM, Ali Jawad <alijawad1 at gmail.com> wrote:
>>> >>
>>> >> Hi
>>> >> The problem happened on the latest trunk that I donwload just after
>>> >> your
>>> >> latest email, I will checkout trunk, clean and make and send output.
>>> >> Thank agains
>>> >> Regards
>>> >>
>>> >>
>>> >> On Sun, Dec 18, 2011 at 12:27 AM, Juli Mallett
>>> >> <juli at clockworksquid.com>
>>> >> wrote:
>>> >>>
>>> >>> First, update to latest trunk since I fixed the issues you've
>>> >>> reported so
>>> >>> far.
>>> >>>
>>> >>> Then could you go to programs/wanproxy on the client, "make clean",
>>> >>> and then send all of the output of "make" to the list?
>>> >>>
>>> >>> Thanks!
>>> >>> Juli.
>>> >>>
>>> >>> On Sat, Dec 17, 2011 at 13:23, Ali Jawad <alijawad1 at gmail.com> wrote:
>>> >>> > Hi Juli
>>> >>> > Thanks for the continous help, I have one on the latest trunk, but
>>> >>> > the
>>> >>> > client I get errors while compiling the trunk on, the problem is
>>> >>> > related to
>>> >>> > this it seems  "result of make in programs/wanproxy/"
>>> >>> >
>>> >>> >>> cc1plus: warnings being treated as errors
>>> >>> >>> ../../io/socket/simple_server.h: In instantiation of
>>> >>> >>> ‘SimpleServer<TCPServer>’:
>>> >>> >>> proxy_listener.h:10:   instantiated from here
>>> >>> >>> ../../io/socket/simple_server.h:12: warning: ‘class
>>> >>> >>> SimpleServer<TCPServer>’ has virtual functions but non-virtual
>>> >>> >>> destructor
>>> >>> >>> proxy_listener.h:10: warning: ‘class ProxyListener’ has virtual
>>> >>> >>> functions
>>> >>> >>> but non-virtual destructor
>>> >>> >>> make: *** [proxy_listener.o] Error 1
>>> >>> >
>>> >>> > On Sun, Dec 18, 2011 at 12:12 AM, Juli Mallett
>>> >>> > <juli at clockworksquid.com>
>>> >>> > wrote:
>>> >>> >>
>>> >>> >> Hi Ali,
>>> >>> >>
>>> >>> >> Thanks for pointing out the problems with -Wnon-virtual-dtor — I
>>> >>> >> fixed
>>> >>> >> those just now.
>>> >>> >>
>>> >>> >> You need to have the client and server running the same version.
>>> >>> >>  The
>>> >>> >> protocol has changed considerable from 0.7.2 to today, and you
>>> >>> >> should
>>> >>> >> not mix the two.
>>> >>> >>
>>> >>> >> That said, I think you may have some other problem with the errors
>>> >>> >> you're seeing; I don't think the mix of versions would explain it.
>>> >>> >> Still, if you would update both to trunk and report any issues you
>>> >>> >> encounter back, I'll try to fix them as soon as possible.  If you
>>> >>> >> continue to experience issues, I'll set up a CentOS VM to test
>>> >>> >> everything myself before asking you to do so again.
>>> >>> >>
>>> >>> >> Sorry about the continued difficulty.  I usually try very hard to
>>> >>> >> make
>>> >>> >> sure users have a seamless experience of building and using
>>> >>> >> WANProxy.
>>> >>> >> Once this is all resolved, I'll put out a release tarball, too.
>>> >>> >>
>>> >>> >> Thanks,
>>> >>> >> Juli.
>>> >>> >>
>>> >>> >> On Sat, Dec 17, 2011 at 05:44, Ali Jawad <alijawad1 at gmail.com>
>>> >>> >> wrote:
>>> >>> >> > Right now using latest trunk for server, and latest tgz for
>>> >>> >> > client
>>> >>> >> >  I am
>>> >>> >> > getting this error
>>> >>> >> >
>>> >>> >> > [root at CentOS54 programs]# /usr/sbin/wanproxy -c
>>> >>> >> >  /etc/wanproxy.conf
>>> >>> >> > 1324129297.168662 [/wanproxy] INFO: WANProxy 0.7.2
>>> >>> >> > 1324129297.169621 [/wanproxy] INFO: Copyright (c) 2008-2011
>>> >>> >> > WANProxy.org.
>>> >>> >> > 1324129297.170510 [/wanproxy] INFO: All rights reserved.
>>> >>> >> > 1324129297.171419 [/wanproxy/config] INFO: Configuring WANProxy.
>>> >>> >> > 1324129297.173140 [/io/system] INFO: Starting IO system.
>>> >>> >> > 1324129297.173861 [/event/thread] INFO: Starting event thread.
>>> >>> >> > 1324129319.092574 [/wanproxy/proxy/proxy0/connector] INFO:
>>> >>> >> > Connect
>>> >>> >> > failed:
>>> >>> >> > <Error>/0 [Success]
>>> >>> >> > 1324129319.895308 [/wanproxy/proxy/proxy0/connector] INFO:
>>> >>> >> > Connect
>>> >>> >> > failed:
>>> >>> >> > <Error>/0 [Success]
>>> >>> >> > 1324129320.699028 [/wanproxy/proxy/proxy0/connector] INFO:
>>> >>> >> > Connect
>>> >>> >> > failed:
>>> >>> >> > <Error>/0 [Success]
>>> >>> >> > 1324129321.499178 [/wanproxy/proxy/proxy0/connector] INFO:
>>> >>> >> > Connect
>>> >>> >> > failed:
>>> >>> >> > <Error>/0 [Success]
>>> >>> >> >
>>> >>> >> >
>>> >>> >> > On Sat, Dec 17, 2011 at 4:33 PM, Ali Jawad <alijawad1 at gmail.com>
>>> >>> >> > wrote:
>>> >>> >> >>
>>> >>> >> >> If I go to the programs/wanproxy and just make there I get
>>> >>> >> >>
>>> >>> >> >> cc1plus: warnings being treated as errors
>>> >>> >> >> ../../io/socket/simple_server.h: In instantiation of
>>> >>> >> >> ‘SimpleServer<TCPServer>’:
>>> >>> >> >> proxy_listener.h:10:   instantiated from here
>>> >>> >> >> ../../io/socket/simple_server.h:12: warning: ‘class
>>> >>> >> >> SimpleServer<TCPServer>’ has virtual functions but non-virtual
>>> >>> >> >> destructor
>>> >>> >> >> proxy_listener.h:10: warning: ‘class ProxyListener’ has virtual
>>> >>> >> >> functions
>>> >>> >> >> but non-virtual destructor
>>> >>> >> >> make: *** [proxy_listener.o] Error 1
>>> >>> >> >>
>>> >>> >> >>
>>> >>> >> >> On Fri, Dec 16, 2011 at 3:21 PM, Juli Mallett
>>> >>> >> >> <juli at clockworksquid.com>
>>> >>> >> >> wrote:
>>> >>> >> >>>
>>> >>> >> >>> Hi Ali,
>>> >>> >> >>>
>>> >>> >> >>> The problems you encountered should be fixed in Subversion.
>>> >>> >> >>>  Can
>>> >>> >> >>> you
>>> >>> >> >>> please provide the errors you encountered?  Most commonly, the
>>> >>> >> >>> problem
>>> >>> >> >>> is missing libuuid-dev or similar package, at least on Linux
>>> >>> >> >>> systems.
>>> >>> >> >>>
>>> >>> >> >>> Thanks!
>>> >>> >> >>> Juli.
>>> >>> >> >>>
>>> >>> >> >>> On Wed, Dec 14, 2011 at 06:56, Ali Jawad <alijawad1 at gmail.com>
>>> >>> >> >>> wrote:
>>> >>> >> >>> > Hi
>>> >>> >> >>> > I tried to install latest src code but did only run in to
>>> >>> >> >>> > problems
>>> >>> >> >>> > during compiling, but 0.7.2 did not face any issues, did you
>>> >>> >> >>> > face
>>> >>> >> >>> > problems with websites opening during that error ?
>>> >>> >> >>> > Regards
>>> >>> >> >>> >
>>> >>> >> >>> > On Wed, Dec 14, 2011 at 3:39 PM, Diego Woitasen
>>> >>> >> >>> > <diego at woitasen.com.ar>
>>> >>> >> >>> > wrote:
>>> >>> >> >>> >> On Tue, Dec 13, 2011 at 6:17 PM, Juli Mallett
>>> >>> >> >>> >> <juli at clockworksquid.com> wrote:
>>> >>> >> >>> >>> Hi Ali,
>>> >>> >> >>> >>>
>>> >>> >> >>> >>> On Tue, Dec 13, 2011 at 13:08, Ali Jawad
>>> >>> >> >>> >>> <alijawad1 at gmail.com>
>>> >>> >> >>> >>> wrote:
>>> >>> >> >>> >>>> and on the client I am getting
>>> >>> >> >>> >>>>
>>> >>> >> >>> >>>> 1323524646.018556 [/wanproxy/proxy/proxy0/connector] ERR:
>>> >>> >> >>> >>>> void
>>> >>> >> >>> >>>> ProxyConnector::splice_complete(Event): Unexpected event:
>>> >>> >> >>> >>>> <Error>/32
>>> >>> >> >>> >>>> [Broken pipe]
>>> >>> >> >>> >>>> 1323524690.407944 [/assert] EMERG: void
>>> >>> >> >>> >>>> PipeProducer::produce(Buffer*): Halting: Assertion
>>> >>> >> >>> >>>> (!output_eos_)
>>> >>> >> >>> >>>> failed at ../../io/pipe/pipe_producer.cc:109 in function
>>> >>> >> >>> >>>> void
>>> >>> >> >>> >>>> PipeProducer::produce(Buffer*).
>>> >>> >> >>> >>>> Aborted
>>> >>> >> >>> >>>
>>> >>> >> >>> >>> Thanks.  Several other users have reported this, but I
>>> >>> >> >>> >>> have
>>> >>> >> >>> >>> not
>>> >>> >> >>> >>> been
>>> >>> >> >>> >>> able to reproduce it.  I will redouble my efforts to
>>> >>> >> >>> >>> reproduce.
>>> >>> >> >>> >>>
>>> >>> >> >>> >>>> On Tue, Dec 13, 2011 at 3:06 AM, Ali Jawad
>>> >>> >> >>> >>>> <alijawad1 at gmail.com>
>>> >>> >> >>> >>>> wrote:
>>> >>> >> >>> >>>>> Hi
>>> >>> >> >>> >>>>> Browsers are FF 4.x and 3.x on Windows and Linux, I also
>>> >>> >> >>> >>>>> tried
>>> >>> >> >>> >>>>> IE8,
>>> >>> >> >>> >>>>> the config is the same one given in the examples, the OS
>>> >>> >> >>> >>>>> is
>>> >>> >> >>> >>>>> CentOS
>>> >>> >> >>> >>>>> 5.6
>>> >>> >> >>> >>>>> 64bit.
>>> >>> >> >>> >>>>> Regards
>>> >>> >> >>> >>>>>
>>> >>> >> >>> >>>>> On Mon, Dec 12, 2011 at 12:48 AM, Juli Mallett
>>> >>> >> >>> >>>>> <juli at clockworksquid.com> wrote:
>>> >>> >> >>> >>>>>> Thanks for the feedback.  I don't think I will need
>>> >>> >> >>> >>>>>> access,
>>> >>> >> >>> >>>>>> but
>>> >>> >> >>> >>>>>> I
>>> >>> >> >>> >>>>>> may
>>> >>> >> >>> >>>>>> need more configuration information to reproduce.  What
>>> >>> >> >>> >>>>>> OS
>>> >>> >> >>> >>>>>> is
>>> >>> >> >>> >>>>>> WANProxy
>>> >>> >> >>> >>>>>> running on?  Can you send your configuration?  What
>>> >>> >> >>> >>>>>> browser
>>> >>> >> >>> >>>>>> is
>>> >>> >> >>> >>>>>> the
>>> >>> >> >>> >>>>>> client?
>>> >>> >> >>> >>>>>>
>>> >>> >> >>> >>>>>> Thanks!
>>> >>> >> >>> >>>>>>
>>> >>> >> >>> >>>>>> On Sun, Dec 11, 2011 at 13:44, Ali Jawad
>>> >>> >> >>> >>>>>> <alijawad1 at gmail.com>
>>> >>> >> >>> >>>>>> wrote:
>>> >>> >> >>> >>>>>>> Hi
>>> >>> >> >>> >>>>>>> Thanks for the help so far, I might be able to give
>>> >>> >> >>> >>>>>>> you
>>> >>> >> >>> >>>>>>> access
>>> >>> >> >>> >>>>>>> to
>>> >>> >> >>> >>>>>>> check it out if needed, as for now no IPV6, sites like
>>> >>> >> >>> >>>>>>> cnn
>>> >>> >> >>> >>>>>>> youtube etc
>>> >>> >> >>> >>>>>>> Regards
>>> >>> >> >>> >>>>>>>
>>> >>> >> >>> >>>>>>> On Mon, Dec 12, 2011 at 12:34 AM, Juli Mallett
>>> >>> >> >>> >>>>>>> <juli at clockworksquid.com> wrote:
>>> >>> >> >>> >>>>>>>> This seems very strange.  Which sites?  Do you have
>>> >>> >> >>> >>>>>>>> IPv6
>>> >>> >> >>> >>>>>>>> connectivity?
>>> >>> >> >>> >>>>>>>>  If you don't have IPv6 connectivity, I wonder if
>>> >>> >> >>> >>>>>>>> that
>>> >>> >> >>> >>>>>>>> might
>>> >>> >> >>> >>>>>>>> be
>>> >>> >> >>> >>>>>>>> the
>>> >>> >> >>> >>>>>>>> problem, and we might need some way to tell WANProxy
>>> >>> >> >>> >>>>>>>> to
>>> >>> >> >>> >>>>>>>> use
>>> >>> >> >>> >>>>>>>> IPv4
>>> >>> >> >>> >>>>>>>> only.
>>> >>> >> >>> >>>>>>>>  If you have specific examples that likely will make
>>> >>> >> >>> >>>>>>>> it
>>> >>> >> >>> >>>>>>>> easier
>>> >>> >> >>> >>>>>>>> for me
>>> >>> >> >>> >>>>>>>> to reproduce and fix.
>>> >>> >> >>> >>>>>>>>
>>> >>> >> >>> >>>>>>>> Thanks & sorry to hear about your difficulty,
>>> >>> >> >>> >>>>>>>> Juli.
>>> >>> >> >>> >>>>>>>>
>>> >>> >> >>> >>>>>>>> On Sun, Dec 11, 2011 at 12:04, Ali Jawad
>>> >>> >> >>> >>>>>>>> <alijawad1 at gmail.com>
>>> >>> >> >>> >>>>>>>> wrote:
>>> >>> >> >>> >>>>>>>>> Hi
>>> >>> >> >>> >>>>>>>>> I completed the setup, but some sites open and some
>>> >>> >> >>> >>>>>>>>> not,
>>> >>> >> >>> >>>>>>>>> some
>>> >>> >> >>> >>>>>>>>> sites
>>> >>> >> >>> >>>>>>>>> need to be reloaded a few times for it to work, I.e.
>>> >>> >> >>> >>>>>>>>> CSS
>>> >>> >> >>> >>>>>>>>> does
>>> >>> >> >>> >>>>>>>>> not load
>>> >>> >> >>> >>>>>>>>> etc.
>>> >>> >> >>> >>>>>>>>> Any ideas ?
>>> >>> >> >>> >>>>>>>>> Regards
>>> >>> >> >>> >>>>>>>>>
>>> >>> >> >>> >>>>>>>>> On Mon, Dec 5, 2011 at 12:27 AM, Juli Mallett
>>> >>> >> >>> >>>>>>>>> <juli at clockworksquid.com> wrote:
>>> >>> >> >>> >>>>>>>>>> Hi Ali,
>>> >>> >> >>> >>>>>>>>>>
>>> >>> >> >>> >>>>>>>>>> If you already have the SOCKS example configured,
>>> >>> >> >>> >>>>>>>>>> then
>>> >>> >> >>> >>>>>>>>>> you
>>> >>> >> >>> >>>>>>>>>> should be
>>> >>> >> >>> >>>>>>>>>> able to use your browser or operating system's
>>> >>> >> >>> >>>>>>>>>> proxy
>>> >>> >> >>> >>>>>>>>>> configuration to
>>> >>> >> >>> >>>>>>>>>> tell it to use SOCKS for HTTP or FTP or whatever
>>> >>> >> >>> >>>>>>>>>> protocols
>>> >>> >> >>> >>>>>>>>>> you
>>> >>> >> >>> >>>>>>>>>> need.
>>> >>> >> >>> >>>>>>>>>> If you have trouble finding this and tell us what
>>> >>> >> >>> >>>>>>>>>> OS
>>> >>> >> >>> >>>>>>>>>> and
>>> >>> >> >>> >>>>>>>>>> browser or
>>> >>> >> >>> >>>>>>>>>> other software you're using I'm sure one of us can
>>> >>> >> >>> >>>>>>>>>> help
>>> >>> >> >>> >>>>>>>>>> you
>>> >>> >> >>> >>>>>>>>>> get the
>>> >>> >> >>> >>>>>>>>>> information you need!
>>> >>> >> >>> >>>>>>>>>>
>>> >>> >> >>> >>>>>>>>>> Thanks,
>>> >>> >> >>> >>>>>>>>>> Juli.
>>> >>> >> >>> >>>>>>>>>>
>>> >>> >> >>> >>>>>>>>>> On Sun, Dec 4, 2011 at 03:26, Ali Jawad
>>> >>> >> >>> >>>>>>>>>> <alijawad1 at gmail.com>
>>> >>> >> >>> >>>>>>>>>> wrote:
>>> >>> >> >>> >>>>>>>>>>> Hi
>>> >>> >> >>> >>>>>>>>>>> I did setup wanproxy in client/server mode as per
>>> >>> >> >>> >>>>>>>>>>> the
>>> >>> >> >>> >>>>>>>>>>> Proxying over a
>>> >>> >> >>> >>>>>>>>>>> WAN using SOCKS example in
>>> >>> >> >>> >>>>>>>>>>> http://wanproxy.org/examples.shtml
>>> >>> >> >>> >>>>>>>>>>> . Here
>>> >>> >> >>> >>>>>>>>>>> is the issue
>>> >>> >> >>> >>>>>>>>>>>
>>> >>> >> >>> >>>>>>>>>>> I do have a server in Asia which is the client and
>>> >>> >> >>> >>>>>>>>>>> a
>>> >>> >> >>> >>>>>>>>>>> server
>>> >>> >> >>> >>>>>>>>>>> in the USA
>>> >>> >> >>> >>>>>>>>>>> which is the wanproxy server, I want traffic for
>>> >>> >> >>> >>>>>>>>>>> browsing
>>> >>> >> >>> >>>>>>>>>>> to
>>> >>> >> >>> >>>>>>>>>>> pass
>>> >>> >> >>> >>>>>>>>>>> through the wanproxy link and from there on fetch
>>> >>> >> >>> >>>>>>>>>>> the
>>> >>> >> >>> >>>>>>>>>>> sites I
>>> >>> >> >>> >>>>>>>>>>> need in
>>> >>> >> >>> >>>>>>>>>>> the states and send them back after that through
>>> >>> >> >>> >>>>>>>>>>> the
>>> >>> >> >>> >>>>>>>>>>> WAN
>>> >>> >> >>> >>>>>>>>>>> link
>>> >>> >> >>> >>>>>>>>>>> to the
>>> >>> >> >>> >>>>>>>>>>> client server which sends them to the browser of
>>> >>> >> >>> >>>>>>>>>>> the
>>> >>> >> >>> >>>>>>>>>>> client
>>> >>> >> >>> >>>>>>>>>>> in my LAN.
>>> >>> >> >>> >>>>>>>>>>>
>>> >>> >> >>> >>>>>>>>>>> Is this something WAN proxy does ? Do I need to do
>>> >>> >> >>> >>>>>>>>>>> additional
>>> >>> >> >>> >>>>>>>>>>> stuff ?
>>> >>> >> >>> >>>>>>>>>>> Such as setting up SQUID on wanproxy server or
>>> >>> >> >>> >>>>>>>>>>> client
>>> >>> >> >>> >>>>>>>>>>> server
>>> >>> >> >>> >>>>>>>>>>> ? Is any
>>> >>> >> >>> >>>>>>>>>>> ip forwarding needed ? What configuration should I
>>> >>> >> >>> >>>>>>>>>>> use
>>> >>> >> >>> >>>>>>>>>>> on
>>> >>> >> >>> >>>>>>>>>>> the
>>> >>> >> >>> >>>>>>>>>>> browsers
>>> >>> >> >>> >>>>>>>>>>> ?
>>> >>> >> >>> >>>>>>>>>>>
>>> >>> >> >>> >>>>>>>>>>> I am sorry for the long list of questions, but I
>>> >>> >> >>> >>>>>>>>>>> am
>>> >>> >> >>> >>>>>>>>>>> sure
>>> >>> >> >>> >>>>>>>>>>> it
>>> >>> >> >>> >>>>>>>>>>> will come
>>> >>> >> >>> >>>>>>>>>>> in handy for people who research the topic online
>>> >>> >> >>> >>>>>>>>>>> "once
>>> >>> >> >>> >>>>>>>>>>> answered that
>>> >>> >> >>> >>>>>>>>>>> is :)"
>>> >>> >> >>> >>>>>>>>>>>
>>> >>> >> >>> >>>>>>>>>>> Thanks !
>>> >>> >> >>> >>>>>>>>>>> _______________________________________________
>>> >>> >> >>> >>>>>>>>>>> wanproxy mailing list
>>> >>> >> >>> >>>>>>>>>>> wanproxy at lists.wanproxy.org
>>> >>> >> >>> >>>>>>>>>>>
>>> >>> >> >>> >>>>>>>>>>>
>>> >>> >> >>> >>>>>>>>>>>
>>> >>> >> >>> >>>>>>>>>>> http://lists.wanproxy.org/listinfo.cgi/wanproxy-wanproxy.org
>>> >>> >> >>> >>> _______________________________________________
>>> >>> >> >>> >>> wanproxy mailing list
>>> >>> >> >>> >>> wanproxy at lists.wanproxy.org
>>> >>> >> >>> >>>
>>> >>> >> >>> >>> http://lists.wanproxy.org/listinfo.cgi/wanproxy-wanproxy.org
>>> >>> >> >>> >>
>>> >>> >> >>> >> Hi,
>>> >>> >> >>> >>  I had that error with the 0.7.2 release. I'm using the
>>> >>> >> >>> >> latest
>>> >>> >> >>> >> code
>>> >>> >> >>> >> from subversion and I haven't seen the error again.
>>> >>> >> >>> >>
>>> >>> >> >>> >> Regards,
>>> >>> >> >>> >>  Diego
>>> >>> >> >>> >>
>>> >>> >> >>> >> --
>>> >>> >> >>> >> Diego Woitasen
>>> >>> >> >>
>>> >>> >> >>
>>> >>> >> >
>>> >>> >
>>> >>> >
>>> >>
>>> >>
>>> >
>>
>>
>



More information about the wanproxy mailing list