need some help with running the example

[Juli Mallett]

Can you verify that server can connect to 192.168.122.30 port 80 when
you're running netcat?  The error you posted would seem to indicate
that it can't, although you ought to be getting that error earlier
than then, if so.  But I guess Linux could be deferring the connect
for some reason, assuming you're using Linux; I'm not sure.

On Sat, Feb 23, 2013 at 1:50 AM, Boxiang Pan <aquarypbx at gmail.com> wrote:
> Hi, Juli,
>
> We're still stuck on getting it run. I changed the if0.host in server.conf
> to its ip "192.168.122.20", and also changed if0.host in client.conf to its
> ip "192.168.122.10" . I used "nc -l 80 > received.file " on intranet
> (192.168.122.30) , when I typed in "nc 192.168.122.10 3300 < send.file" ,
> I always got   ERR: void ProxyConnector::splice_complete(Event): Unexpected
> event: <Error>/32 [Broken pipe]   on the client and
> ERR: void ProxyConnector::splice_complete(Event): Unexpected event:
> <Error>/111 [Connection refused]    on the server.
>
> I've been stuck on this for a few days, but still don't know how to fix
> this. Could you please take a look when you get a chance? We really
> appreciate your help. This is a very critical step in our project, so we
> really want to get it running soon. Thank you!
>
> our server.conf:
>
> create codec codec0
> set codec0.codec XCodec
> activate codec0
>
> create interface if0
> set if0.family IPv4
> set if0.host "192.168.122.20"
> set if0.port "3301"
> activate if0
>
> create peer peer0
> set peer0.family IPv4
> set peer0.host "192.168.122.30"
> set peer0.port "80"
> activate peer0
>
> create proxy proxy0
> set proxy0.interface if0
> set proxy0.interface_codec codec0
> set proxy0.peer peer0
> set proxy0.peer_codec None
> activate proxy0
>
> our client.conf:
> create codec codec0
> set codec0.codec XCodec
> activate codec0
>
> create interface if0
> set if0.family IPv4
> set if0.host "192.168.122.10"
> set if0.port "3300"
> activate if0
>
> create peer peer0
> set peer0.family IPv4
> set peer0.host "192.168.122.20"
> set peer0.port "3301"
> activate peer0
>
> create proxy proxy0
> set proxy0.interface if0
> set proxy0.interface_codec None
> set proxy0.peer peer0
> set proxy0.peer_codec codec0
> activate proxy0
>
>
>>
>> --
>
>
> Boxiang Pan
>
> Department of Electrical and Computer Engineering
> University of California, San Diego
> Tel: 858-999-7655
>
>


On Sat, Feb 23, 2013 at 1:50 AM, Boxiang Pan <aquarypbx at gmail.com> wrote:
> Hi, Juli,
>
> We're still stuck on getting it run. I changed the if0.host in server.conf
> to its ip "192.168.122.20", and also changed if0.host in client.conf to its
> ip "192.168.122.10" . I used "nc -l 80 > received.file " on intranet
> (192.168.122.30) , when I typed in "nc 192.168.122.10 3300 < send.file" ,
> I always got   ERR: void ProxyConnector::splice_complete(Event): Unexpected
> event: <Error>/32 [Broken pipe]   on the client and
> ERR: void ProxyConnector::splice_complete(Event): Unexpected event:
> <Error>/111 [Connection refused]    on the server.
>
> I've been stuck on this for a few days, but still don't know how to fix
> this. Could you please take a look when you get a chance? We really
> appreciate your help. This is a very critical step in our project, so we
> really want to get it running soon. Thank you!
>
> our server.conf:
>
> create codec codec0
> set codec0.codec XCodec
> activate codec0
>
> create interface if0
> set if0.family IPv4
> set if0.host "192.168.122.20"
> set if0.port "3301"
> activate if0
>
> create peer peer0
> set peer0.family IPv4
> set peer0.host "192.168.122.30"
> set peer0.port "80"
> activate peer0
>
> create proxy proxy0
> set proxy0.interface if0
> set proxy0.interface_codec codec0
> set proxy0.peer peer0
> set proxy0.peer_codec None
> activate proxy0
>
> our client.conf:
> create codec codec0
> set codec0.codec XCodec
> activate codec0
>
> create interface if0
> set if0.family IPv4
> set if0.host "192.168.122.10"
> set if0.port "3300"
> activate if0
>
> create peer peer0
> set peer0.family IPv4
> set peer0.host "192.168.122.20"
> set peer0.port "3301"
> activate peer0
>
> create proxy proxy0
> set proxy0.interface if0
> set proxy0.interface_codec None
> set proxy0.peer peer0
> set proxy0.peer_codec codec0
> activate proxy0
>
>
>>
>> --
>
>
> Boxiang Pan
>
> Department of Electrical and Computer Engineering
> University of California, San Diego
> Tel: 858-999-7655
>
>