WANProxy gets killed every now and again... Think it might be memory usage...

[Juli Mallett]

Tiernan,

Note that the monitoring really does kinda suck (sorry, everyone.)
I'd love to hear about your experiences with the improved cache
configuration and the on-disk caching!  Does it resolve your issues?
Note that you should allow for non-trivial overhead when you configure
the size of the RAM cache, because WANProxy will use other memory
above and beyond that.

Juli.

On Sat, Apr 9, 2016 at 10:38 AM, Tiernan OToole
<tiernan at tiernanotoole.ie> wrote:
> Never mind… I found the answer… the sample config file at
> https://github.com/wanproxy/wanproxy/blob/master/programs/wanproxy/wanproxy.conf
> has all i need to setup the caching and monitoring!
>
>
>
> --Tiernan
>
>
>
> From: wanproxy [mailto:wanproxy-bounces at lists.wanproxy.org] On Behalf Of
> Tiernan OToole
> Sent: 09 April 2016 18:09
> To: wanproxy at lists.wanproxy.org
> Subject: WANProxy gets killed every now and again... Think it might be
> memory usage...
>
>
>
> Morning all.
>
>
>
> Have a machine in the house with WANProxy running on it (latest source out
> of GitHub) and one in a remote data center (same code). Both run debian 8.3
> x64. The machine in house has 8GB RAM and the machine in the DC has 2GB (it
> is a VM for testing currently).
>
>
>
> I have a socks server upstream on the box, which is proxied over WAN proxy…
> locally, I have redsocks acting as a tunnel between my network and the
> remote location… All is well, except for every now and again, I get a
> message telling me that WANProxy has been killed, but no details as to why…
> but given that WANProxy in house is using about 6GB of RAM and is somewhat
> stable, I have just though it might be to do with memory…
>
>
>
> So, is there a way to limit the amount of memory that WANProxy uses for
> cache? And, since I have more (fast) storage in the DC (40GB SSD) to use
> that more than the memory?
>
>
>
> And, just as a question: How do I monitor the usage and cache efficiency of
> a WANProxy install? This is my first “production” install in a while… think
> the last time I played with it was 2012…
>
>
>
> Thanks.
>
>
>
> --Tiernan
>
>
> _______________________________________________
> wanproxy mailing list
> wanproxy at lists.wanproxy.org
> http://lists.wanproxy.org/listinfo.cgi/wanproxy-wanproxy.org
>