<div dir="ltr">Hi July<div>I was able to make the connection work, it was a stupid mistake on my side, the errors are less and performance is slightly better but still slow I am getting these errors on client side now </div>
<div><br></div><div><div>1324212755.168570 [/wanproxy/proxy/proxy0/connector] ERR: void ProxyConnector::splice_complete(Event): Unexpected event: <Error>/104 [Connection reset by peer]</div><div>1324212756.652634 [/wanproxy/proxy/proxy0/connector] ERR: void ProxyConnector::splice_complete(Event): Unexpected event: <Error>/104 [Connection reset by peer]</div>
<div>1324212776.041883 [/wanproxy/proxy/proxy0/connector] ERR: void ProxyConnector::splice_complete(Event): Unexpected event: <Error>/104 [Connection reset by peer]</div><div>1324212777.468335 [/wanproxy/proxy/proxy0/connector] ERR: void ProxyConnector::splice_complete(Event): Unexpected event: <Error>/104 [Connection reset by peer]</div>
<div><br></div><div>On server side I am getting </div><div><br></div><div><div>1324184191.330804 [/wanproxy/proxy/proxy-socks0/connector] ERR: void ProxyConnector::splice_complete(Event): Unexpected event: <Error>/104 [Connection reset by peer]</div>
<div>1324184194.297132 [/wanproxy/proxy/proxy-socks0/connector] ERR: void ProxyConnector::splice_complete(Event): Unexpected event: <Error>/104 [Connection reset by peer]</div><div>1324184202.948238 [/wanproxy/proxy/proxy-socks0/connector] ERR: void ProxyConnector::splice_complete(Event): Unexpected event: <Error>/104 [Connection reset by peer]</div>
<div>1324184202.951848 [/wanproxy/proxy/proxy-socks0/connector] ERR: void ProxyConnector::splice_complete(Event): Unexpected event: <Error>/104 [Connection reset by peer]</div><div>1324184217.752559 [/wanproxy/proxy/proxy-socks0/connector] ERR: void ProxyConnector::splice_complete(Event): Unexpected event: <Error>/104 [Connection reset by peer]</div>
<div>1324184217.755806 [/wanproxy/proxy/proxy-socks0/connector] ERR: void ProxyConnector::splice_complete(Event): Unexpected event: <Error>/104 [Connection reset by peer]</div></div><div><br></div><div><br></div><div>
<br></div><div>Regards</div><br><div class="gmail_quote">On Sun, Dec 18, 2011 at 3:06 AM, Juli Mallett <span dir="ltr"><<a href="mailto:juli@clockworksquid.com">juli@clockworksquid.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Very strange. Can you send the client and server configurations? I'm<br>
guessing that connect is failing because the ports are mismatched or<br>
similar, but I can't be sure. It would also be helpful if you could<br>
telnet from the client to the port the server is supposed to be<br>
listening on, to verify that there are no firewalling issues involved.<br>
<div class="HOEnZb"><div class="h5"><br>
On Sat, Dec 17, 2011 at 15:21, Ali Jawad <<a href="mailto:alijawad1@gmail.com">alijawad1@gmail.com</a>> wrote:<br>
> Hi Juli<br>
> Did checkout to version 895 on both machines and did the following on both<br>
> machines as well , make clean in programs/wanproxy, make, copy wanproxy file<br>
> to /usr/sbin/ then launch<br>
><br>
> /usr/sbin/wanproxy -c /etc/wanproxy.conf<br>
><br>
> On the client I get<br>
><br>
> 1324163928.337113 [/wanproxy/proxy/proxy0/listener] INFO: Listening on:<br>
> [0.0.0.0]:3300<br>
> 1324163928.337732 [/event/thread] INFO: Starting event thread.<br>
> 1324163930.640914 [/wanproxy/proxy/proxy0/connector] INFO: Connect failed:<br>
> <Error>/0 [Success]<br>
> 1324163931.393061 [/wanproxy/proxy/proxy0/connector] INFO: Connect failed:<br>
> <Error>/0 [Success]<br>
> 1324163932.144333 [/wanproxy/proxy/proxy0/connector] INFO: Connect failed:<br>
> <Error>/0 [Success]<br>
> 1324163932.919439 [/wanproxy/proxy/proxy0/connector] INFO: Connect failed:<br>
> <Error>/0 [Success]<br>
> 1324163933.906755 [/wanproxy/proxy/proxy0/connector] INFO: Connect failed:<br>
> <Error>/0 [Success]<br>
> 1324163934.677630 [/wanproxy/proxy/proxy0/connector] INFO: Connect failed:<br>
> <Error>/0 [Success]<br>
> 1324163935.459671 [/wanproxy/proxy/proxy0/connector] INFO: Connect failed:<br>
> <Error>/0 [Success]<br>
><br>
><br>
> And the browser is not working when setting socks to use wanproxy client.<br>
> Anything I missed here ?<br>
><br>
> Thanks<br>
><br>
> On Sun, Dec 18, 2011 at 2:02 AM, Ali Jawad <<a href="mailto:alijawad1@gmail.com">alijawad1@gmail.com</a>> wrote:<br>
>><br>
>> Hi<br>
>> The problem happened on the latest trunk that I donwload just after your<br>
>> latest email, I will checkout trunk, clean and make and send output.<br>
>> Thank agains<br>
>> Regards<br>
>><br>
>><br>
>> On Sun, Dec 18, 2011 at 12:27 AM, Juli Mallett <<a href="mailto:juli@clockworksquid.com">juli@clockworksquid.com</a>><br>
>> wrote:<br>
>>><br>
>>> First, update to latest trunk since I fixed the issues you've reported so<br>
>>> far.<br>
>>><br>
>>> Then could you go to programs/wanproxy on the client, "make clean",<br>
>>> and then send all of the output of "make" to the list?<br>
>>><br>
>>> Thanks!<br>
>>> Juli.<br>
>>><br>
>>> On Sat, Dec 17, 2011 at 13:23, Ali Jawad <<a href="mailto:alijawad1@gmail.com">alijawad1@gmail.com</a>> wrote:<br>
>>> > Hi Juli<br>
>>> > Thanks for the continous help, I have one on the latest trunk, but the<br>
>>> > client I get errors while compiling the trunk on, the problem is<br>
>>> > related to<br>
>>> > this it seems "result of make in programs/wanproxy/"<br>
>>> ><br>
>>> >>> cc1plus: warnings being treated as errors<br>
>>> >>> ../../io/socket/simple_server.h: In instantiation of<br>
>>> >>> ‘SimpleServer<TCPServer>’:<br>
>>> >>> proxy_listener.h:10: instantiated from here<br>
>>> >>> ../../io/socket/simple_server.h:12: warning: ‘class<br>
>>> >>> SimpleServer<TCPServer>’ has virtual functions but non-virtual<br>
>>> >>> destructor<br>
>>> >>> proxy_listener.h:10: warning: ‘class ProxyListener’ has virtual<br>
>>> >>> functions<br>
>>> >>> but non-virtual destructor<br>
>>> >>> make: *** [proxy_listener.o] Error 1<br>
>>> ><br>
>>> > On Sun, Dec 18, 2011 at 12:12 AM, Juli Mallett<br>
>>> > <<a href="mailto:juli@clockworksquid.com">juli@clockworksquid.com</a>><br>
>>> > wrote:<br>
>>> >><br>
>>> >> Hi Ali,<br>
>>> >><br>
>>> >> Thanks for pointing out the problems with -Wnon-virtual-dtor — I fixed<br>
>>> >> those just now.<br>
>>> >><br>
>>> >> You need to have the client and server running the same version. The<br>
>>> >> protocol has changed considerable from 0.7.2 to today, and you should<br>
>>> >> not mix the two.<br>
>>> >><br>
>>> >> That said, I think you may have some other problem with the errors<br>
>>> >> you're seeing; I don't think the mix of versions would explain it.<br>
>>> >> Still, if you would update both to trunk and report any issues you<br>
>>> >> encounter back, I'll try to fix them as soon as possible. If you<br>
>>> >> continue to experience issues, I'll set up a CentOS VM to test<br>
>>> >> everything myself before asking you to do so again.<br>
>>> >><br>
>>> >> Sorry about the continued difficulty. I usually try very hard to make<br>
>>> >> sure users have a seamless experience of building and using WANProxy.<br>
>>> >> Once this is all resolved, I'll put out a release tarball, too.<br>
>>> >><br>
>>> >> Thanks,<br>
>>> >> Juli.<br>
>>> >><br>
>>> >> On Sat, Dec 17, 2011 at 05:44, Ali Jawad <<a href="mailto:alijawad1@gmail.com">alijawad1@gmail.com</a>> wrote:<br>
>>> >> > Right now using latest trunk for server, and latest tgz for client<br>
>>> >> > I am<br>
>>> >> > getting this error<br>
>>> >> ><br>
>>> >> > [root@CentOS54 programs]# /usr/sbin/wanproxy -c /etc/wanproxy.conf<br>
>>> >> > 1324129297.168662 [/wanproxy] INFO: WANProxy 0.7.2<br>
>>> >> > 1324129297.169621 [/wanproxy] INFO: Copyright (c) 2008-2011<br>
>>> >> > WANProxy.org.<br>
>>> >> > 1324129297.170510 [/wanproxy] INFO: All rights reserved.<br>
>>> >> > 1324129297.171419 [/wanproxy/config] INFO: Configuring WANProxy.<br>
>>> >> > 1324129297.173140 [/io/system] INFO: Starting IO system.<br>
>>> >> > 1324129297.173861 [/event/thread] INFO: Starting event thread.<br>
>>> >> > 1324129319.092574 [/wanproxy/proxy/proxy0/connector] INFO: Connect<br>
>>> >> > failed:<br>
>>> >> > <Error>/0 [Success]<br>
>>> >> > 1324129319.895308 [/wanproxy/proxy/proxy0/connector] INFO: Connect<br>
>>> >> > failed:<br>
>>> >> > <Error>/0 [Success]<br>
>>> >> > 1324129320.699028 [/wanproxy/proxy/proxy0/connector] INFO: Connect<br>
>>> >> > failed:<br>
>>> >> > <Error>/0 [Success]<br>
>>> >> > 1324129321.499178 [/wanproxy/proxy/proxy0/connector] INFO: Connect<br>
>>> >> > failed:<br>
>>> >> > <Error>/0 [Success]<br>
>>> >> ><br>
>>> >> ><br>
>>> >> > On Sat, Dec 17, 2011 at 4:33 PM, Ali Jawad <<a href="mailto:alijawad1@gmail.com">alijawad1@gmail.com</a>><br>
>>> >> > wrote:<br>
>>> >> >><br>
>>> >> >> If I go to the programs/wanproxy and just make there I get<br>
>>> >> >><br>
>>> >> >> cc1plus: warnings being treated as errors<br>
>>> >> >> ../../io/socket/simple_server.h: In instantiation of<br>
>>> >> >> ‘SimpleServer<TCPServer>’:<br>
>>> >> >> proxy_listener.h:10: instantiated from here<br>
>>> >> >> ../../io/socket/simple_server.h:12: warning: ‘class<br>
>>> >> >> SimpleServer<TCPServer>’ has virtual functions but non-virtual<br>
>>> >> >> destructor<br>
>>> >> >> proxy_listener.h:10: warning: ‘class ProxyListener’ has virtual<br>
>>> >> >> functions<br>
>>> >> >> but non-virtual destructor<br>
>>> >> >> make: *** [proxy_listener.o] Error 1<br>
>>> >> >><br>
>>> >> >><br>
>>> >> >> On Fri, Dec 16, 2011 at 3:21 PM, Juli Mallett<br>
>>> >> >> <<a href="mailto:juli@clockworksquid.com">juli@clockworksquid.com</a>><br>
>>> >> >> wrote:<br>
>>> >> >>><br>
>>> >> >>> Hi Ali,<br>
>>> >> >>><br>
>>> >> >>> The problems you encountered should be fixed in Subversion. Can<br>
>>> >> >>> you<br>
>>> >> >>> please provide the errors you encountered? Most commonly, the<br>
>>> >> >>> problem<br>
>>> >> >>> is missing libuuid-dev or similar package, at least on Linux<br>
>>> >> >>> systems.<br>
>>> >> >>><br>
>>> >> >>> Thanks!<br>
>>> >> >>> Juli.<br>
>>> >> >>><br>
>>> >> >>> On Wed, Dec 14, 2011 at 06:56, Ali Jawad <<a href="mailto:alijawad1@gmail.com">alijawad1@gmail.com</a>><br>
>>> >> >>> wrote:<br>
>>> >> >>> > Hi<br>
>>> >> >>> > I tried to install latest src code but did only run in to<br>
>>> >> >>> > problems<br>
>>> >> >>> > during compiling, but 0.7.2 did not face any issues, did you<br>
>>> >> >>> > face<br>
>>> >> >>> > problems with websites opening during that error ?<br>
>>> >> >>> > Regards<br>
>>> >> >>> ><br>
>>> >> >>> > On Wed, Dec 14, 2011 at 3:39 PM, Diego Woitasen<br>
>>> >> >>> > <<a href="mailto:diego@woitasen.com.ar">diego@woitasen.com.ar</a>><br>
>>> >> >>> > wrote:<br>
>>> >> >>> >> On Tue, Dec 13, 2011 at 6:17 PM, Juli Mallett<br>
>>> >> >>> >> <<a href="mailto:juli@clockworksquid.com">juli@clockworksquid.com</a>> wrote:<br>
>>> >> >>> >>> Hi Ali,<br>
>>> >> >>> >>><br>
>>> >> >>> >>> On Tue, Dec 13, 2011 at 13:08, Ali Jawad <<a href="mailto:alijawad1@gmail.com">alijawad1@gmail.com</a>><br>
>>> >> >>> >>> wrote:<br>
>>> >> >>> >>>> and on the client I am getting<br>
>>> >> >>> >>>><br>
>>> >> >>> >>>> 1323524646.018556 [/wanproxy/proxy/proxy0/connector] ERR:<br>
>>> >> >>> >>>> void<br>
>>> >> >>> >>>> ProxyConnector::splice_complete(Event): Unexpected event:<br>
>>> >> >>> >>>> <Error>/32<br>
>>> >> >>> >>>> [Broken pipe]<br>
>>> >> >>> >>>> 1323524690.407944 [/assert] EMERG: void<br>
>>> >> >>> >>>> PipeProducer::produce(Buffer*): Halting: Assertion<br>
>>> >> >>> >>>> (!output_eos_)<br>
>>> >> >>> >>>> failed at ../../io/pipe/pipe_producer.cc:109 in function void<br>
>>> >> >>> >>>> PipeProducer::produce(Buffer*).<br>
>>> >> >>> >>>> Aborted<br>
>>> >> >>> >>><br>
>>> >> >>> >>> Thanks. Several other users have reported this, but I have<br>
>>> >> >>> >>> not<br>
>>> >> >>> >>> been<br>
>>> >> >>> >>> able to reproduce it. I will redouble my efforts to<br>
>>> >> >>> >>> reproduce.<br>
>>> >> >>> >>><br>
>>> >> >>> >>>> On Tue, Dec 13, 2011 at 3:06 AM, Ali Jawad<br>
>>> >> >>> >>>> <<a href="mailto:alijawad1@gmail.com">alijawad1@gmail.com</a>><br>
>>> >> >>> >>>> wrote:<br>
>>> >> >>> >>>>> Hi<br>
>>> >> >>> >>>>> Browsers are FF 4.x and 3.x on Windows and Linux, I also<br>
>>> >> >>> >>>>> tried<br>
>>> >> >>> >>>>> IE8,<br>
>>> >> >>> >>>>> the config is the same one given in the examples, the OS is<br>
>>> >> >>> >>>>> CentOS<br>
>>> >> >>> >>>>> 5.6<br>
>>> >> >>> >>>>> 64bit.<br>
>>> >> >>> >>>>> Regards<br>
>>> >> >>> >>>>><br>
>>> >> >>> >>>>> On Mon, Dec 12, 2011 at 12:48 AM, Juli Mallett<br>
>>> >> >>> >>>>> <<a href="mailto:juli@clockworksquid.com">juli@clockworksquid.com</a>> wrote:<br>
>>> >> >>> >>>>>> Thanks for the feedback. I don't think I will need access,<br>
>>> >> >>> >>>>>> but<br>
>>> >> >>> >>>>>> I<br>
>>> >> >>> >>>>>> may<br>
>>> >> >>> >>>>>> need more configuration information to reproduce. What OS<br>
>>> >> >>> >>>>>> is<br>
>>> >> >>> >>>>>> WANProxy<br>
>>> >> >>> >>>>>> running on? Can you send your configuration? What browser<br>
>>> >> >>> >>>>>> is<br>
>>> >> >>> >>>>>> the<br>
>>> >> >>> >>>>>> client?<br>
>>> >> >>> >>>>>><br>
>>> >> >>> >>>>>> Thanks!<br>
>>> >> >>> >>>>>><br>
>>> >> >>> >>>>>> On Sun, Dec 11, 2011 at 13:44, Ali Jawad<br>
>>> >> >>> >>>>>> <<a href="mailto:alijawad1@gmail.com">alijawad1@gmail.com</a>><br>
>>> >> >>> >>>>>> wrote:<br>
>>> >> >>> >>>>>>> Hi<br>
>>> >> >>> >>>>>>> Thanks for the help so far, I might be able to give you<br>
>>> >> >>> >>>>>>> access<br>
>>> >> >>> >>>>>>> to<br>
>>> >> >>> >>>>>>> check it out if needed, as for now no IPV6, sites like cnn<br>
>>> >> >>> >>>>>>> youtube etc<br>
>>> >> >>> >>>>>>> Regards<br>
>>> >> >>> >>>>>>><br>
>>> >> >>> >>>>>>> On Mon, Dec 12, 2011 at 12:34 AM, Juli Mallett<br>
>>> >> >>> >>>>>>> <<a href="mailto:juli@clockworksquid.com">juli@clockworksquid.com</a>> wrote:<br>
>>> >> >>> >>>>>>>> This seems very strange. Which sites? Do you have IPv6<br>
>>> >> >>> >>>>>>>> connectivity?<br>
>>> >> >>> >>>>>>>> If you don't have IPv6 connectivity, I wonder if that<br>
>>> >> >>> >>>>>>>> might<br>
>>> >> >>> >>>>>>>> be<br>
>>> >> >>> >>>>>>>> the<br>
>>> >> >>> >>>>>>>> problem, and we might need some way to tell WANProxy to<br>
>>> >> >>> >>>>>>>> use<br>
>>> >> >>> >>>>>>>> IPv4<br>
>>> >> >>> >>>>>>>> only.<br>
>>> >> >>> >>>>>>>> If you have specific examples that likely will make it<br>
>>> >> >>> >>>>>>>> easier<br>
>>> >> >>> >>>>>>>> for me<br>
>>> >> >>> >>>>>>>> to reproduce and fix.<br>
>>> >> >>> >>>>>>>><br>
>>> >> >>> >>>>>>>> Thanks & sorry to hear about your difficulty,<br>
>>> >> >>> >>>>>>>> Juli.<br>
>>> >> >>> >>>>>>>><br>
>>> >> >>> >>>>>>>> On Sun, Dec 11, 2011 at 12:04, Ali Jawad<br>
>>> >> >>> >>>>>>>> <<a href="mailto:alijawad1@gmail.com">alijawad1@gmail.com</a>><br>
>>> >> >>> >>>>>>>> wrote:<br>
>>> >> >>> >>>>>>>>> Hi<br>
>>> >> >>> >>>>>>>>> I completed the setup, but some sites open and some not,<br>
>>> >> >>> >>>>>>>>> some<br>
>>> >> >>> >>>>>>>>> sites<br>
>>> >> >>> >>>>>>>>> need to be reloaded a few times for it to work, I.e. CSS<br>
>>> >> >>> >>>>>>>>> does<br>
>>> >> >>> >>>>>>>>> not load<br>
>>> >> >>> >>>>>>>>> etc.<br>
>>> >> >>> >>>>>>>>> Any ideas ?<br>
>>> >> >>> >>>>>>>>> Regards<br>
>>> >> >>> >>>>>>>>><br>
>>> >> >>> >>>>>>>>> On Mon, Dec 5, 2011 at 12:27 AM, Juli Mallett<br>
>>> >> >>> >>>>>>>>> <<a href="mailto:juli@clockworksquid.com">juli@clockworksquid.com</a>> wrote:<br>
>>> >> >>> >>>>>>>>>> Hi Ali,<br>
>>> >> >>> >>>>>>>>>><br>
>>> >> >>> >>>>>>>>>> If you already have the SOCKS example configured, then<br>
>>> >> >>> >>>>>>>>>> you<br>
>>> >> >>> >>>>>>>>>> should be<br>
>>> >> >>> >>>>>>>>>> able to use your browser or operating system's proxy<br>
>>> >> >>> >>>>>>>>>> configuration to<br>
>>> >> >>> >>>>>>>>>> tell it to use SOCKS for HTTP or FTP or whatever<br>
>>> >> >>> >>>>>>>>>> protocols<br>
>>> >> >>> >>>>>>>>>> you<br>
>>> >> >>> >>>>>>>>>> need.<br>
>>> >> >>> >>>>>>>>>> If you have trouble finding this and tell us what OS<br>
>>> >> >>> >>>>>>>>>> and<br>
>>> >> >>> >>>>>>>>>> browser or<br>
>>> >> >>> >>>>>>>>>> other software you're using I'm sure one of us can help<br>
>>> >> >>> >>>>>>>>>> you<br>
>>> >> >>> >>>>>>>>>> get the<br>
>>> >> >>> >>>>>>>>>> information you need!<br>
>>> >> >>> >>>>>>>>>><br>
>>> >> >>> >>>>>>>>>> Thanks,<br>
>>> >> >>> >>>>>>>>>> Juli.<br>
>>> >> >>> >>>>>>>>>><br>
>>> >> >>> >>>>>>>>>> On Sun, Dec 4, 2011 at 03:26, Ali Jawad<br>
>>> >> >>> >>>>>>>>>> <<a href="mailto:alijawad1@gmail.com">alijawad1@gmail.com</a>><br>
>>> >> >>> >>>>>>>>>> wrote:<br>
>>> >> >>> >>>>>>>>>>> Hi<br>
>>> >> >>> >>>>>>>>>>> I did setup wanproxy in client/server mode as per the<br>
>>> >> >>> >>>>>>>>>>> Proxying over a<br>
>>> >> >>> >>>>>>>>>>> WAN using SOCKS example in<br>
>>> >> >>> >>>>>>>>>>> <a href="http://wanproxy.org/examples.shtml" target="_blank">http://wanproxy.org/examples.shtml</a><br>
>>> >> >>> >>>>>>>>>>> . Here<br>
>>> >> >>> >>>>>>>>>>> is the issue<br>
>>> >> >>> >>>>>>>>>>><br>
>>> >> >>> >>>>>>>>>>> I do have a server in Asia which is the client and a<br>
>>> >> >>> >>>>>>>>>>> server<br>
>>> >> >>> >>>>>>>>>>> in the USA<br>
>>> >> >>> >>>>>>>>>>> which is the wanproxy server, I want traffic for<br>
>>> >> >>> >>>>>>>>>>> browsing<br>
>>> >> >>> >>>>>>>>>>> to<br>
>>> >> >>> >>>>>>>>>>> pass<br>
>>> >> >>> >>>>>>>>>>> through the wanproxy link and from there on fetch the<br>
>>> >> >>> >>>>>>>>>>> sites I<br>
>>> >> >>> >>>>>>>>>>> need in<br>
>>> >> >>> >>>>>>>>>>> the states and send them back after that through the<br>
>>> >> >>> >>>>>>>>>>> WAN<br>
>>> >> >>> >>>>>>>>>>> link<br>
>>> >> >>> >>>>>>>>>>> to the<br>
>>> >> >>> >>>>>>>>>>> client server which sends them to the browser of the<br>
>>> >> >>> >>>>>>>>>>> client<br>
>>> >> >>> >>>>>>>>>>> in my LAN.<br>
>>> >> >>> >>>>>>>>>>><br>
>>> >> >>> >>>>>>>>>>> Is this something WAN proxy does ? Do I need to do<br>
>>> >> >>> >>>>>>>>>>> additional<br>
>>> >> >>> >>>>>>>>>>> stuff ?<br>
>>> >> >>> >>>>>>>>>>> Such as setting up SQUID on wanproxy server or client<br>
>>> >> >>> >>>>>>>>>>> server<br>
>>> >> >>> >>>>>>>>>>> ? Is any<br>
>>> >> >>> >>>>>>>>>>> ip forwarding needed ? What configuration should I use<br>
>>> >> >>> >>>>>>>>>>> on<br>
>>> >> >>> >>>>>>>>>>> the<br>
>>> >> >>> >>>>>>>>>>> browsers<br>
>>> >> >>> >>>>>>>>>>> ?<br>
>>> >> >>> >>>>>>>>>>><br>
>>> >> >>> >>>>>>>>>>> I am sorry for the long list of questions, but I am<br>
>>> >> >>> >>>>>>>>>>> sure<br>
>>> >> >>> >>>>>>>>>>> it<br>
>>> >> >>> >>>>>>>>>>> will come<br>
>>> >> >>> >>>>>>>>>>> in handy for people who research the topic online<br>
>>> >> >>> >>>>>>>>>>> "once<br>
>>> >> >>> >>>>>>>>>>> answered that<br>
>>> >> >>> >>>>>>>>>>> is :)"<br>
>>> >> >>> >>>>>>>>>>><br>
>>> >> >>> >>>>>>>>>>> Thanks !<br>
>>> >> >>> >>>>>>>>>>> _______________________________________________<br>
>>> >> >>> >>>>>>>>>>> wanproxy mailing list<br>
>>> >> >>> >>>>>>>>>>> <a href="mailto:wanproxy@lists.wanproxy.org">wanproxy@lists.wanproxy.org</a><br>
>>> >> >>> >>>>>>>>>>><br>
>>> >> >>> >>>>>>>>>>><br>
>>> >> >>> >>>>>>>>>>> <a href="http://lists.wanproxy.org/listinfo.cgi/wanproxy-wanproxy.org" target="_blank">http://lists.wanproxy.org/listinfo.cgi/wanproxy-wanproxy.org</a><br>
>>> >> >>> >>> _______________________________________________<br>
>>> >> >>> >>> wanproxy mailing list<br>
>>> >> >>> >>> <a href="mailto:wanproxy@lists.wanproxy.org">wanproxy@lists.wanproxy.org</a><br>
>>> >> >>> >>> <a href="http://lists.wanproxy.org/listinfo.cgi/wanproxy-wanproxy.org" target="_blank">http://lists.wanproxy.org/listinfo.cgi/wanproxy-wanproxy.org</a><br>
>>> >> >>> >><br>
>>> >> >>> >> Hi,<br>
>>> >> >>> >> I had that error with the 0.7.2 release. I'm using the latest<br>
>>> >> >>> >> code<br>
>>> >> >>> >> from subversion and I haven't seen the error again.<br>
>>> >> >>> >><br>
>>> >> >>> >> Regards,<br>
>>> >> >>> >> Diego<br>
>>> >> >>> >><br>
>>> >> >>> >> --<br>
>>> >> >>> >> Diego Woitasen<br>
>>> >> >><br>
>>> >> >><br>
>>> >> ><br>
>>> ><br>
>>> ><br>
>><br>
>><br>
><br>
</div></div></blockquote></div><br></div></div>