Speed Up WAN Link..Ideas needed

[Juli Mallett]

Hi Ali,

The problems you encountered should be fixed in Subversion.  Can you
please provide the errors you encountered?  Most commonly, the problem
is missing libuuid-dev or similar package, at least on Linux systems.

Thanks!
Juli.

On Wed, Dec 14, 2011 at 06:56, Ali Jawad <alijawad1 at gmail.com> wrote:
> Hi
> I tried to install latest src code but did only run in to problems
> during compiling, but 0.7.2 did not face any issues, did you face
> problems with websites opening during that error ?
> Regards
>
> On Wed, Dec 14, 2011 at 3:39 PM, Diego Woitasen <diego at woitasen.com.ar> wrote:
>> On Tue, Dec 13, 2011 at 6:17 PM, Juli Mallett <juli at clockworksquid.com> wrote:
>>> Hi Ali,
>>>
>>> On Tue, Dec 13, 2011 at 13:08, Ali Jawad <alijawad1 at gmail.com> wrote:
>>>> and on the client I am getting
>>>>
>>>> 1323524646.018556 [/wanproxy/proxy/proxy0/connector] ERR: void
>>>> ProxyConnector::splice_complete(Event): Unexpected event: <Error>/32
>>>> [Broken pipe]
>>>> 1323524690.407944 [/assert] EMERG: void
>>>> PipeProducer::produce(Buffer*): Halting: Assertion (!output_eos_)
>>>> failed at ../../io/pipe/pipe_producer.cc:109 in function void
>>>> PipeProducer::produce(Buffer*).
>>>> Aborted
>>>
>>> Thanks.  Several other users have reported this, but I have not been
>>> able to reproduce it.  I will redouble my efforts to reproduce.
>>>
>>>> On Tue, Dec 13, 2011 at 3:06 AM, Ali Jawad <alijawad1 at gmail.com> wrote:
>>>>> Hi
>>>>> Browsers are FF 4.x and 3.x on Windows and Linux, I also tried IE8,
>>>>> the config is the same one given in the examples, the OS is CentOS 5.6
>>>>> 64bit.
>>>>> Regards
>>>>>
>>>>> On Mon, Dec 12, 2011 at 12:48 AM, Juli Mallett <juli at clockworksquid.com> wrote:
>>>>>> Thanks for the feedback.  I don't think I will need access, but I may
>>>>>> need more configuration information to reproduce.  What OS is WANProxy
>>>>>> running on?  Can you send your configuration?  What browser is the
>>>>>> client?
>>>>>>
>>>>>> Thanks!
>>>>>>
>>>>>> On Sun, Dec 11, 2011 at 13:44, Ali Jawad <alijawad1 at gmail.com> wrote:
>>>>>>> Hi
>>>>>>> Thanks for the help so far, I might be able to give you access to
>>>>>>> check it out if needed, as for now no IPV6, sites like cnn youtube etc
>>>>>>> Regards
>>>>>>>
>>>>>>> On Mon, Dec 12, 2011 at 12:34 AM, Juli Mallett <juli at clockworksquid.com> wrote:
>>>>>>>> This seems very strange.  Which sites?  Do you have IPv6 connectivity?
>>>>>>>>  If you don't have IPv6 connectivity, I wonder if that might be the
>>>>>>>> problem, and we might need some way to tell WANProxy to use IPv4 only.
>>>>>>>>  If you have specific examples that likely will make it easier for me
>>>>>>>> to reproduce and fix.
>>>>>>>>
>>>>>>>> Thanks & sorry to hear about your difficulty,
>>>>>>>> Juli.
>>>>>>>>
>>>>>>>> On Sun, Dec 11, 2011 at 12:04, Ali Jawad <alijawad1 at gmail.com> wrote:
>>>>>>>>> Hi
>>>>>>>>> I completed the setup, but some sites open and some not, some sites
>>>>>>>>> need to be reloaded a few times for it to work, I.e. CSS does not load
>>>>>>>>> etc.
>>>>>>>>> Any ideas ?
>>>>>>>>> Regards
>>>>>>>>>
>>>>>>>>> On Mon, Dec 5, 2011 at 12:27 AM, Juli Mallett <juli at clockworksquid.com> wrote:
>>>>>>>>>> Hi Ali,
>>>>>>>>>>
>>>>>>>>>> If you already have the SOCKS example configured, then you should be
>>>>>>>>>> able to use your browser or operating system's proxy configuration to
>>>>>>>>>> tell it to use SOCKS for HTTP or FTP or whatever protocols you need.
>>>>>>>>>> If you have trouble finding this and tell us what OS and browser or
>>>>>>>>>> other software you're using I'm sure one of us can help you get the
>>>>>>>>>> information you need!
>>>>>>>>>>
>>>>>>>>>> Thanks,
>>>>>>>>>> Juli.
>>>>>>>>>>
>>>>>>>>>> On Sun, Dec 4, 2011 at 03:26, Ali Jawad <alijawad1 at gmail.com> wrote:
>>>>>>>>>>> Hi
>>>>>>>>>>> I did setup wanproxy in client/server mode as per the Proxying over a
>>>>>>>>>>> WAN using SOCKS example in http://wanproxy.org/examples.shtml . Here
>>>>>>>>>>> is the issue
>>>>>>>>>>>
>>>>>>>>>>> I do have a server in Asia which is the client and a server in the USA
>>>>>>>>>>> which is the wanproxy server, I want traffic for browsing to pass
>>>>>>>>>>> through the wanproxy link and from there on fetch the sites I need in
>>>>>>>>>>> the states and send them back after that through the WAN link to the
>>>>>>>>>>> client server which sends them to the browser of the client in my LAN.
>>>>>>>>>>>
>>>>>>>>>>> Is this something WAN proxy does ? Do I need to do additional stuff ?
>>>>>>>>>>> Such as setting up SQUID on wanproxy server or client server ? Is any
>>>>>>>>>>> ip forwarding needed ? What configuration should I use on the browsers
>>>>>>>>>>> ?
>>>>>>>>>>>
>>>>>>>>>>> I am sorry for the long list of questions, but I am sure it will come
>>>>>>>>>>> in handy for people who research the topic online "once answered that
>>>>>>>>>>> is :)"
>>>>>>>>>>>
>>>>>>>>>>> Thanks !
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> wanproxy mailing list
>>>>>>>>>>> wanproxy at lists.wanproxy.org
>>>>>>>>>>> http://lists.wanproxy.org/listinfo.cgi/wanproxy-wanproxy.org
>>> _______________________________________________
>>> wanproxy mailing list
>>> wanproxy at lists.wanproxy.org
>>> http://lists.wanproxy.org/listinfo.cgi/wanproxy-wanproxy.org
>>
>> Hi,
>>  I had that error with the 0.7.2 release. I'm using the latest code
>> from subversion and I haven't seen the error again.
>>
>> Regards,
>>  Diego
>>
>> --
>> Diego Woitasen